MCM700
Micro Hi-Fi System
User manual
Manuel d'utilisation
Manual del usuario
Benutzerhandücher
Gebruikershandleidingen
Manuale per l'utente
Användarhandböckerna
Brugermanual
Käyttöoppaita
Manual do usuário
ꢀꢁꢂꢀꢃꢄꢅꢆꢃꢇ ꢂꢄꢈꢉꢊꢋ
1
%
#
∞
£
&
*
^
@
!
!
9
@
≤
(
8
0
5
)
§
≥
$
•
¡
™
ª
6
#
8
⁄
2
3
9
$
MICRO SSYTEM MCM700
1
4
7
%
TUNER
/
POWER AMPLIFIER MCM700
5
º
3
SF
DK
Advarsel:Usynlig laserstråling ved åbning
når sikkerhedsafbrydere er ude af funktion.
Undgå utsættelse for stråling.
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen
muulla kuin tässä käyttöohjeessa mainitulla
tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei
saa olla alttiina tippu-ja roiskevedelle.
Bemærk: Netafbryderen er sekundært
indkoblet og ofbryder ikke strømmen fra
nettet. Den indbyggede netdel er derfor
tilsluttet til lysnettet så længe netstikket
sidder i stikkontakten.
Huom.Toiminnanvalitsin on kytketty
toisiopuolelle, eikä se kytke laitetta irti
sähköverkosta. Sisäänrakennettu verkko-
osa on kytkettynä sähköverkkoon aina
silloin, kun pistoke on pistorasiassa.
S
Klass 1 laseraparat
Varning! Om apparaten används på annat
sätt än i denna bruksanvisning specificerats,
kan användaren utsättas för osynlig
laserstrålning, som överskrider gränsen för
laserklass 1.
Observera! Stömbrytaren är sekundärt
kopplad och bryter inte strömmen från
nätet. Den inbyggda nätdelen är därför
ansluten till elnätet så länge stickproppen
sitter i vägguttaget.
4
Index
English ------------------------------------------------6
Français -------------------------------------------- 26
Español --------------------------------------------- 46
Deutsch--------------------------------------------- 46
Nederlands ---------------------------------------- 86
Italiano-------------------------------------------- 106
Svenska ------------------------------------------- 126
Dansk --------------------------------------------- 146
Suomi --------------------------------------------- 166
Português ---------------------------------------- 186
Eꢁꢁꢂꢃꢄꢅꢆ ----------------------------------------- 206
5
Contents
General Information
Clock/Timer
Environmental Information ................................ 7
Supplied accessories ............................................ 7
Safety information ................................................ 7
Hearing Safety ....................................................... 8
Setting the clock ................................................. 22
Viewing the clock ............................................... 22
Setting the timer................................................. 22
Activating and deactivating SLEEP .................. 22
Preparations
Specifications ........................................... 23
Maintenance.............................................. 23
Troubleshooting ............................. 24~25
Rear connections ........................................9 ~ 10
Before using the remote control .................... 11
Replacing battery (lithium CR2025) into the
remote control ................................................... 11
Controls
Controls on the system and remote
control ........................................................... 12~13
Basic Functions
Switching the system on ................................... 14
Switching the system to Eco Power Standby
mode ..................................................................... 14
Power SavingAutomatic Standby.................... 14
Adjusting volume and sound............................ 14
CD/MP3-CD Operation
Loading a disc ...................................................... 15
Basic playback controls .............................. 15~16
Playing an MP3 disc ............................................ 16
Different play modes: SHUFFLE and REPEAT ...
................................................................................ 17
Programming track numbers ........................... 17
Erasing the programme ..................................... 17
FM Radio Reception
Tuning to radio stations .................................... 18
Programming radio stations...................... 18~19
Automatic programming
Manual programming
Tuning to preset radio stations ....................... 19
RDS ....................................................................... 19
Setting the RDS clock ....................................... 19
External Sources
Using a non-USB device.................................... 20
Using a USB mass storage device ............ 20~21
6
General Information
This product complies with the radio
interference requirements of the European
Community.
Safety Information
●
Before operating the system, check that the
operating voltage indicated on the typeplate of
your system is identical with the voltage of your
local power supply. If not, please consult your
dealer.
Environmental Information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
●
●
Place the system on a flat, hard and stable
surface.
Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
Install this unit near the AC outlet and where the
AC power plug can be reached easily.
The apparatus shall not be exposed to dripping
or splashing.
If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
Your system consists of materials which can be
recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
●
●
Disposal of your old product
Your product is designed and
manufactured with high quality
materials and components,
which can be recycled and
reused.
●
●
●
●
●
When this crossed-out
wheeled bin symbol is attached to a product it
means the product is covered by the European
Directive 2002/96/EC
Please inform yourself about the local separate
collection system for electrical and electronic
products.
●
●
Please act according to your local rules and do
not dispose of your old products with your
normal household waste.The correct disposal of
your old product will help prevent potential
negative consequences for the environment and
human health.
Supplied accessories
– 2 loudspeaker boxes
– remote control (with battery)
– FM antenna
– control cable
7
General Information
Hearing Safety
Listen at a moderate volume.
●
Using headphones at a high volume can impair
your hearing. This product can produce sounds
in decibel ranges that may cause hearing loss for
a normal person, even for exposure less than a
minute. The higher decibel ranges are offered
for those that may have already experienced
some hearing loss.
●
Sound can be deceiving. Over time your hearing
"comfort level" adapts to higher volumes of
sound. So after prolonged listening, what sounds
"normal" can actually be loud and harmful to
your hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
●
●
Set your volume control at a low setting.
Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
Listen for reasonable periods of time:
●
●
Prolonged exposure to sound, even at normally
"safe" levels, can also cause hearing loss.
Be sure to use your equipment reasonably and
take appropriate breaks.
Be sure to observe the following
guidelines when using your headphones.
●
●
●
●
Listen at reasonable volumes for reasonable
periods of time.
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that you
can't hear what's around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations.
●
Do not use headphones while operating a
motorized vehicle, cycling, skateboarding, etc.; it
may create a traffic hazard and is illegal in many
areas.
8
Preparations
Speaker
(right)
Speaker
(left)
FM antenna
AC power cord
Rear connections
B Connecting the control cable
Connect the serial port marked “CONTROL
CABLE” at the rear of the CD player to the
same port at the rear of the power amplifier
with the supplied flat control cable.
The type plate is located at the rear of the
system.
For users in the U.K.: please follow the
instructions on page 2.
C FM antenna connection
A Power
Connect the supplied FM antenna to the FM
AERIAL terminal. Fully extend and adjust the
position of the antenna for optimal reception.
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
Warning!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it (not available for all versions).
●
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
Notes:
– This system does not support MW reception.
9
Preparations
●
Insert the USB device's USB plug into the
socket on the set.
C Speakers Connection
Connect the speaker wires to the SPEAKERS
(4Ω) terminals, right speaker to "R" and left
speaker to "L", the wire marked in red to "+" and
the wire marked in black to "-".
OR
for the devices with USB cables:
1 Insert one plug of the USB cable (not supplied)
to the socket on the set.
2 Insert the other plug of the USB cable to the
USB output terminal of the USB device.
OR
for the memory card:
1 Insert the memory card into a card reader (not
supplied).
●
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
2 Use a USB cable (not supplied) to connect the
card reader into the
socket on the set.
Notes:
– For optimal sound performance, use the
supplied speakers.
Connecting other equipment to your
system
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
●
Connect the audio left and right OUT terminals
of aTV,VCR, Laser Disc player, DVD player or
CD Recorder to the AUX IN (1 or 2) terminals.
Note:
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX IN (1 or 2) left terminal. Alternatively, you
can use a “single to double” cinch cable (the output
sound still remain mono).
D Optional connection
The optional equipment and connecting cords are
not supplied. Refer to the operating instructions
of the connected equipment for details.
Connecting a USB device or memory
card
By connecting a USB mass storage device
(including USB flash memory, USB flash players
or memory cards) to the Hi-Fi system, you can
enjoy the device's stored music through the
powerful speakers of Hi-Fi system.
Slide the protective sheet on the USB
socket to the right before plugging in the
USB device.
10
Preparations
Before using the remote control
1 Pull out the plastic protective sheet.
2 Select the source you wish to control by
pressing one of the source select keys on the
remote control (for example DISC, FM).
3 Then select the desired function (for example
ÉÅ , à , á).
Remove the plastic protective sheet
Replacing battery (lithium
CR2025) into the remote control
1 Press the slot on the battery compartment.
2 Pull out the battery compartment.
3 Replace a new battery and fully insert the
battery compartment back to the original
position.
1
CR2025
2
3
CAUTION!
Batteries contain chemical substances, so
they should be disposed of properly.
11
Controls (illustrations on page 3)
@ ¡ / ™
for CD/MP3-CD/WMA/USB
Controls on the system and
remote control
................................. skips to the beginning of a
current/previous/subsequent
track.
1 STANDBY-ON/ECO POWERB
–
switches the system on or to Eco Power
standby/normal standby with clock display.
# SOURCE
–
selects the respective sound source for CD/USB/
FM/AUX (1 or 2).
2 Display screen
shows the status of the system.
–
$ PROGRAM (PROG)
3 0
for CD/MP3/USB programs tracks.
for FM .................. programs radio stations.
–
opens/closes the CD door.
4 IR SENSOR
% REPEAT/STEREO (REPEAT/ST.)
–
remote sensor
for CD/MP3/WMA/USB
selects a repeat
playback mode.
5 VOLUME -/+ (VOL +/-)
for FM .................. sets stereo or mono sound
mode.
–
–
adjusts the volume level.
adjusts the hours and minutes for the clock/timer
function.
^ SHUFFLE
plays disc tracks randomly.
& TIMER
–
6 CD Door
7 S/T
–
sets the timer function.
for CD/MP3-CD/WMA/USB
fast searches back and forward
within a track/disc (press and
hold).
* CLOCK
–
sets the clock function.
( INTRO
................................. skips to the beginning of a
current/previous/subsequent
track.
for CD/MP3/WMA/USB
all tracks.
starts scanning of
) MUTE
8 9/PRESET +
–
interrupts and resumes sound production.
–
–
stops disc playback or erases a disc program.
(for FM; on the system only) selects a preset
radio station.
¡ DSC (Digital Sound Control)
–
selects sound characteristics: POP/JAZZ/
CLASSIC/ROCK/FLAT.
9 ÉÅ/PRESET -
™ DBB (Dynamic Bass Boost)
enhances the bass.
£ DISPLAY
selects different disc information display modes
during playback.
–
–
starts or interrupts playback.
(for FM; on the system only) selects a preset
radio station.
–
–
0 ALBUM +/-
for MP3-CD/WMA/USB
skips to the
≤ RDS
beginning of a current/previous/
subsequent album.
–
for FM, displays RDS information.
∞ SLEEP
! 5 /6
–
selects the sleeper time.
for CD/MP3-CD/WMA/USB
fast searches back and forward
within a track/disc (press and
hold).
for FM .................. tunes to radio stations (down/
up).
12
Controls
§ DIM
selects different levels of brightness for the
display screen.
≥ Numerical Keypad (0~9)
(for CD/MP3) selects a track directly.
–
–
• LOUD
enables or disables automatic loudness
adjustment.
–
ª SHIFT
inputs a number larger than 10 (used together
with the Numerical Keypad).
–
º n
–
connects a headphone.
⁄ USB DIRECT
–
jack for the external USB mass storage device.
Notes for remote control:
– First select the source you wish to control
by pressing one of the source select keys on
the remote control (for example CD, FM).
– Then select the desired function (for
example ÉÅ, à , á).
13
Basic Functions
Switching the system to Eco
Power Standby mode
●
●
Press STANDBY-ON/ECO POWER B (or
B on the remote).
➜ The backlight for clock display is dim in
standby.
➜ The ECO POWER LED will be lighted.
To view clock time in standby mode, press and
hold STANDBY-ON/ECO POWER B on
the front panel for more than 3 seconds or
more.
➜ The system enters the standby mode with
clock display.
●
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode (ECO Power Standby or normal
standby), source and tuner presets will be
retained in the player's memory.
Power Saving Automatic Standby
As a power-saving feature, the system
automatically switches to Eco Power/ Standby 15
minutes after a CD has reached the end and no
control is operated.
Adjusting volume and sound
1 Turn the VOLUME -/+ knob or press VOL +/-
on the remote to decrease or increase the
volume.
➜ Display shows the volume levelVOL and a
number from MIN 01, 02, ...30 MAX.
2 Press DSC repeatedly to select the desired
sound effect: POP/JAZZ/CLASSIC/ROCK/FLAT.
3 Press DBB to switch bass enhancement on or
Important!
off.
Before you operate the system, complete
the preparation procedures.
➜ DBB appears when enabled and disappears
when disabled.
Switching the system on
4 Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback will continue without sound and
MUTE will flash on the display.
●
●
Press STANDBY-ON/ECO POWER B (or
B on the remote).
➜ The system will switch to the last selected
source.
●
To activate sound reproduction you can:
– press MUTE again;
Press SOURCE on the top of the system or
CD, USB, FM or AUX on the remote control.
➜ The system will switch to the selected source.
– adjust the volume controls;
– change source.
14
CD/MP3-CD Operation
3 Insert a disc with the printed side facing up. Press
0 again to close the compartment.
➜ CLOSEis displayed followed by READ DISC
as the CD player scans the contents of a disc,
and then playback starts automatically (if not,
press ÉÅ).
Basic playback controls
To play a disc
●
●
Press ÉÅ to start playback.
➜ The current track number and elapsed
playing time of the track are displayed during
disc playback.
To select a different track
Press the control knob on the front panel to the
left or right (corresponding to S/T) or
press ¡ / ™ on the remote once or repeatedly
until the desired track number appears in the
display.
●
●
You can also use the Numerical Keypad
(0~9) on the remote to select a track directly.
To input a number larger than 10, press SHIFT
on the remote once or more to select the first
digit you want and then use the Numerical
Keypad (0~9) to input the second digit.
●
●
If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press ÉÅ to start playback.
Te xt display during playback
In CD mode
Important!
The lens of the CD player should never be
touched.
Press DISPLAY on the remote control
repeatedly to see the following information.
➜ Track number and elapsed playback time of
current track.
➜ Track number and remaining playback time of
current track.
Loading a disc
This CD player plays Audio Discs including CD
Recordables, CD-Rewritables and MP3 CD.
➜ Track number and total remaining playback
time.
●
CD-ROM, CD-I, CDV,VCD, DVD or computer
CDs, however, are not possible.
In MP3-CD mode
1 Press SOURCE on the top of the system to
select CD or press CD on the remote.
●
Press DISPLAY on the remote control to
display the ID-3 information if available.
2 Press 0 to open the CD compartment.
➜ OPENis displayed when the compartment
cover slides up.
15
CD/MP3-CD Operation
To find a passage within a track
Playing an MP3 disc
1 Press and hold the control knob on the front
panel to the left or right (corresponding to
S/T) or press 5 /6 on the remote.
1 Load an MP3 disc.
➜ The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
2 When you recognize the passage you want,
release the control knob (5 /6 on the
remote).
2 Press ALBUM +/- on the remote to select a
desired album.
➜ Normal playback continues.
3 Press the control knob on the front panel to the
left or right (corresponding to S/T) or
press ¡ / ™ on the remote to select a desired
track.
To stop playback
●
●
Press 9.
➜ The album number will change accordingly as
you reach the first track of an album by pressing
S (¡ on the remote) or the last track of an
album by pressing T (™ on the remote).
To interrupt playback
Press ÉÅ during playback.
➜ The display freezes and the elapsed playing
time flashes when playback is interrupted.
➜ To resume, press ÉÅ again.
4 Press ÉÅ to start playback.
Supported MP3 disc formats:
– ISO9660, Joliet
Notes:
CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: FM, USB or AUX.
– you select standby.
– Maximum title number: 512 (depending on
filename length)
– Maximum album number: 255
– Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
– the set auto off time arrives.
– Supported Bit-rates: 32~256 (kbps), variable
bitrates
To scan all tracks in a disc
●
Press INTRO on the remote to play the first
10 seconds of each track in the whole disc one
by one.
➜ INTROappears on the display.
➜ The playback will start from the first track of
the current disc.
To stop scanning
●
Press INTRO on the remote again until
INTRO disappears.
16
CD/MP3-CD Operation
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.The REPEAT
modes can also be combined with PROGRAM.
Programming track numbers
Program in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1 Press the control knob on the front panel of the
system upward (corresponding to PROGRAM)
or press PROG on the remote to enter the
programming mode.
1 To select your play mode, press SHUFFLE or
REPEAT on the remote control before or
during playback until the display shows the
desired function.
➜ A track number flashes.
➜ SHUFFLEappears if the shuffle playback is
activated and disappears if deactivated.
➜ If REPEAT appears while TRK flashes on the
display panel, it indicates to play the current track
repeatedly.
➜ If REPEAT ALL is displayed, it indicates to
play all tracks in the whole disc repeatedly.
➜ For an MP3 CD, if both REPEAT and TRK
flash on the display panel, it indicates to play the
current track repeatedly.
2 Press the control knob on the front panel of the
system to the left or right (corresonding to
S/T) or press ¡ / ™ on the remote to
select your desired track number.
For an MP3 CD, Press ALBUM +/- on the
remote to select a desired album number.
3 Press the control knob on the front panel of the
system upward (corresponding to PROGRAM)
or press PROG on the remote to confirm the
track number to be stored.
●
➜ For an MP3 CD, if both REPEAT and ALB
flash on the display panel, it indicates to play the
current album repeatedly.
➜ P-X displays, in which Xdenotes the next
program number to be stored.
2 Press ÉÅ to start playback if in the STOP
position.
4 Repeat steps 2-3 to select and store all desired
tracks.
➜ If you have selected SHUFFLE, playback starts
automatically.
➜ Playback starts automatically from the first
track programmed if you attempt to program
more than 20 tracks.
3 To return to normal playback, press the
respective SHUFFLE or REPEAT button until
REPEAT or SHUFFLE is no longer displayed.
5 Press 9 to finish programming.
➜ PROG displays on the screen.
●
You can also press 9 to cancel your play mode.
6 To start playback of your disc program, press
ÉÅ directly.
Note:
– The Repeat and Shuffle functions cannot be
activated simultaneously.
Erasing the program
You can erase the program by:
●
pressing the control knob on the front panel of
the system upward (corresponding to
PROGRAM) or press PROG on the remote
again;
●
●
pressing 9 once in the STOP mode;
pressing 9 twice during playback;
➜ PROGdisappears.
●
opening the CD compartment;
17
FM Radio Reception
●
To tune to a weak station, press the control
knob on the front panel of the system to the left
or right (corresponding to S/T) or 5 /
6 on the remote briefly and repeatedly until
you have found optimal reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory.
Automatic programming
Automatic programming will start from preset 1
and stop at the last programmed station.All the
former programmed radio stations will be
overridden.
1 Press PRESET -/+ on the top of the system or
¡ / ™ on the remote to select the preset
number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2 Press and hold the control knob on the front
panel upward (corresponding to PROGRAM)
or PROG on the remote for more than 2
seconds to activate programming.
➜ AUTOis displayed and available stations are
programmed in order of waveband reception
strength: RDS followed by FM. The last preset
automatically stored will then be played.
Manual programming
1 Tune to your desired station (see “Tuning to
Tuning to radio stations
radio stations”).
1 Press SOURCE on the top of the system or
2 Press the control knob on the front panel
upward (corresponding to PROGRAM) or
PROG on the remote to activate programming.
FM on the remote to select FM.
2 Press and hold the control knob on the front
panel of the system to the left or right
3 Press PRESET -/+ on the top of the system or
¡ / ™ on the remote to allocate a number
from 1 to 20 to this station.
(corresponding to S/T) or 5 /6 on the
remote.
➜ The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
4 Press the control knob on the front panel
upward (corresponding to PROGRAM) or
PROG on the remote again to confirm the
setting.
3 Repeat step 2 if necessary until you find the
desired station.
➜ The preset number and the frequency of the
preset station are shown.
18
Radio Reception
Setting the RDS clock
5 Repeat the above four steps to store other
stations.
Some RDS radio station may be transmitting a
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
●
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
1 Tune to a RDS station.
2 The system will read the RDS time and set the
●
●
●
Press PRESET -/+ on the top of the system or
¡ / ™ on the remote until the desired preset
station is displayed.
You can also use the Numerical Keypad
(0~9) to input a number directly and tune to
the station associated with this number.
To input a number larger than 10, press SHIFT
once or more to select the first digit you want
and then use the Numerical Keypad (0~9)
to input the second digit.
clock automatically.
Note:
– Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the
transmitting RDS radio station.
RDS Programme types
NO TYPE.......... No RDS programme type
NEWS.................... News services
AFFAIRS.......... Politics and current affairs
INFO.................... Special information programmes
SPORT................ Sports
EDUCATE.......... Education and advanced training
DRAMA................ Radio plays and literature
CULTURE.......... Culture, religion and society
SCIENCE.......... Science
RDS
Radio Data System is a service that allows
FM stations to show additional information. If
you are receiving a RDS station,
station name are displayed.
When automatic programming is used, RDS
stations will be programmed first.
and the
VARIED............. Entertainment programmes
POP M................. Pop music
ROCK M ............. Rock music
Scrolling through different RDS
information
MOR M................. Light music
●
Press RDS on the remote control briefly and
repeatedly to scroll through the following
information (if available):
– Station name
– Programme type such as NEWS, SPORT,
POP M ...
LIGHT M.......... Light classical music
CLASSICS...... Classical music
OTHER M.......... Special music programmes
WEATHER.......... Weather
FINANCE.......... Finance
CHILDREN...... Children’s programmes
SOCIAL............. Social Affairs
RELIGION...... Religion
– Radio text messages
– Frequency
PHONE IN....... Phone In
TRAVEL............. Travel
LEISURE.......... Leisure
JAZZ.................... Jazz Music
COUNTRY.......... Country Music
NATION M....... National Music
OLDIES............. Oldies Music
FOLK M ............. Folk Music
DOCUMENT...... Documentary
TEST.................... AlarmTest
ALARM................ Alarm
19
External Sources
b) If your Mass storage device required a battery/
power source. Please make sure you have a fresh
battery in it or charge the USB device first and
then plug it into the micro system again.
– Supported Music type:
Using a non-USB device
1 Connect the audio out terminals of the external
equipment (TV,VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX terminals of
your system.
a)This device only supports unprotected music
with the following file extension:
2 Press SOURCE repeatedly (or AUX on the
remote control) to select external equipment.
.mp3
.wma
Note:
b) Music bought from on-line music stores are not
supported because they are secured by Digital
Rights Management protection (DRM).
c) File name extensions that end with the
following are not supported:
– All the sound control features (DSC or DBB, for
example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
.wav; .m4a; .m4p;mp4; .aac and etc.
– No Direct connection can be made from
Computer USB port to the micro system even you
have either or both mp3 or wma files in your
computer.
Using a USB mass storage device
By connecting a USB mass storage device to the
Hi-Fi system, you can enjoy the device's stored
music through the powerful speakers of Hi-Fi
system.
Supported formats:
– USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 bytes)
– MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
– WMA v9 or earlier
– Directory nesting up to a maximum of 8
levels
– Number of albums/ folders: maximum 99
– Number of tracks/titles: maximum 400
– ID3 tag v2.0 or later
Playing a USB mass storage device
Compatible USB mass storage devices
With the Hi-Fi system, you can use:
– USB flash memory (USB 2.0 or USB1.1)
– USB flash players (USB 2.0 or USB1.1)
– memory cards (requires an additional card
reader to work with this Hi-Fi system)
Notes:
– In some USB flash players (or memory devices),
the stored contents are recorded using copyright
protection technology. Such protected contents will
be unplayable on any other devices (such as this
Hi-Fi system).
– Compatibility of the USB connection on this
micro system:
a)This micro system supports most USB Mass
storage devices (MSD) that are compliant to the
USB MSD standards.
– File name in Unicode UTF8 (maximum length:
128 bytes)
The system will not play or support the
following:
– Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
– Non-supported file formats are skipped.This
means that e.g.:Word documents .doc or
MP3 files with extension .dlf are ignored and
will not be played.
i) Most common Mass storage class devices are
flash drives, memory sticks, jump drives and etc.
ii) If you see a "Disc Drive" show up on your
computer after you plugged the mass storage
device into your computer, most likely it is MSD
compliant and it will work with this micro
system.
– AAC, WAV, PCM audio files
– DRM protected WMA files
– WMA files in Lossless format
20
External Sources
How to transfer music files from PC to a
USB mass storage device
Notes:
– If you have not organized MP3/WMA files into
any albums on your disc, an album "01" will be
automatically assigned for all those files.
– Make sure that the file names of MP3 files end
with .mp3. and the file names ofWMA files end
with .wma.
– For DRM protectedWMA files, useWindows
Media Player 10 (or later) for conversion.Visit
Media Player andWM DRM (Windows Media
Digital Rights Management).
By dragging and dropping music files, you can
easily transfer your favorite music from PC to a
USB mass storage device.
For the flash player, you can also use its music
management software for the music transfer.
However, thoseWMA files may be
unplayable for compatibility reasons.
How to organize your MP3/WMA files on
the USB mass storage device
This Hi-Fi system will browse the MP3/WMA
files in the folders/sub-folders/titles order.
Example:
1 Check the USB device has been properly
connected. (See Installation: Connecting an
additional appliance).
Root
2 Press SOURCE (USB on the remote) once or
more to select USB.
Title 001
Title 002
Title 003
– NO TRACKappears if no audio file is found in
the USB device.
3 Play the USB's audio files as you do with the
albums/tracks on a CD (See CD/MP3
Operations).
Album 01
Title 001
Title 002
Title 003
Notes:
– For compatibility reasons, the album/track
information may differ from what it is displayed
through flash players' music management software.
– File names or ID3 tags will be displayed as --- if
they are not in English.
Album 02
Title 001
Title 002
Title 003
Album 03
Title 001
Title 002
Title 003
Organize your MP3/WMA files in different
folders or subfolders as required.
21
Clock/Timer
Setting the timer
●
●
The system can be used as an alarm clock,
whereby the CD, USB, FM,AUX is switched on
at a set time.The clock time needs to be set first
before the timer can be used.
During setting, if no button is pressed within 30
seconds, the system will exit timer setting mode
automatically.
1 Press and hold TIMER on the remote control
until the time flashes on the display.
➜ ”SET TIMER” is displayed briefly.Then, the
hour digits flash on the display screen.
2 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
hours.
3 Press TIMER to confirm.
➜ The minute digits flash on the display screen.
4 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
minutes.
Setting the clock
5 Press TIMER to confirm the time setting.
1 In Standby mode, press and hold CLOCK on
the remote until the time flashes on the display.
➜ ”SET CLOCK” is displayed briefly.Then, the
hour digits flash on the display screen.
➜ ”OFF” flashes on the display screen.
6 Tur n VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to select
“ON”.
2 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
hours.
➜
icon appears on the display screen.
To deactivate the timer
3 Press CLOCK to confirm.
●
Select “OFF” at Step 6.
➜ The minute digits flash on the display screen.
Activating and deactivating
SLEEP
4 Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
minutes.
The sleep timer enables the system to switch off
by itself after a set period of time.
5 Press CLOCK again to confirm the clock
setting.
●
●
Press SLEEP on the remote control.
➜ The display shows one of the sleep time
options in the following sequence: SLEEP-OFF,
SLEEP-10, SLEEP-20, ... SLEEP-90,
SLEEP-OFF... Once the sleep funtion is
activated, the SLEEPicon will be displayed.
Notes:
– This system only supports 24-hour mode.
– The clock setting will be erased when the system
is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 30 seconds.
To deactivate, press SLEEP on the remote
control once or more until OFF is shown, or
press STANDBY-ON/ ECO POWER B
(or B on the remote).
Viewing the clock
●
Press CLOCK in the active mode.
➜ SLEEP disappears.
➜ The clock time is displayed.
22
Specifications
AMPLIFIER
USB PLAYER
Output power ....................................... 2 x 80W RMS
Signal-to-noise ratio....................................... ≥ 70 dBA
Frequency response ...... 20 Hz – 20 KHz, 3 dB
Input sensitivity AUX ....................... 0.5V (max. 2V)
Impedance loudspeakers ......................................... 4 Ω
Impedance headphones ........................................ 32 Ω
Output power headphones ....................... <50 mW
USB ................................................................... 12Mb/s,V1.1
......................................... support MP3 and WMA files
Number of albums/folders .................maximum 99
Number of tracks/titles...................... maximum 400
SPEAKERS
Bass reflex system
Dimensions (w x h x d) . 145 x 230 x 215 (mm)
CD PLAYER
Frequency range ................................ 20 Hz – 20 kHz
Signal-to-noise ratio............................................ 70 dBA
GENERAL INFORMATION
AC Power .....................................230 – 240V / 50 Hz
Dimensions (w x h x d) . 208 x 156 x 268 (mm)
Weight(with/without speakers) ...... 4.30 / 2.31 kg
Standby power consumption ............................<7W
Eco power standby .................................................<1W
TUNER
FM wave range ................................... 87.5 – 108 MHz
Sensitivity at 75 Ω
– FM ................................................................................ 20dBf
Selectivity ................................................................. ≥ 25 dB
Total harmonic distortion..................................... ≤ 1%
Frequency response
Specifications and external appearance are
subject to change without notice.
– FM .............................................................. 63 – 6000 Hz
Signal-to-noise-ratio
– FM ....................................................................... ≥ 50 dBA
Maintenance
Cleaning the disc lens
Cleaning the Cabinet
●
After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
●
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
●
●
When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the centre
out.
Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic spray intended for
analogue records.
23
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.
Problem
Solution
“NO DISC” is displayed.
✔
✔
✔
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at the lens
has cleared.
✔
✔
Replace or clean the disc, see “Maintenance”.
Use a finalised CD-RW or correct format disc.
Radio reception is poor.
✔
✔
Increase the distance between the Micro HiFi
System and yourTV orVCR.
Hang up one end of theT-shape antenna and
keep the other end at horizontal angle to it.
The system does not react when buttons
are pressed.
✔
Remove and reconnect the AC power plug and
switch on the system again.
Sound cannot be heard or is of poor
quality.
✔
✔
✔
✔
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
The left and right sound outputs are
reversed.
✔
✔
Check the speaker connections and location.
The remote control does not function
properly.
Select the source (CD or FM, for example)
before pressing the function button (ÉÅ, 5 /
6).
✔
✔
Reduce the distance between the remote
control and the system.
Insert the battery with its polarities
(+/– signs) aligned as indicated.
Replace the battery.
✔
✔
Point the remote control directly toward
IR sensor on the front of the system.
The timer is not working.
✔
✔
Set the clock correctly.
Switch on the timer.
The Clock/Timer setting is erased.
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
24
Troubleshooting
Problem
Solution
Some files on the USB device are not
displayed.
✔
✔
Check if the number of folders exceeds 99 or
the number of titles exceeds 400.
“DEVICE NOT SUPPORTED” scrolls on the
display.
Remove the USB mass storage device or select
another source.
25
|