Set up
Connect
1
2
Finding the viewing channel
Connect the speakers and
subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the DVD system.
Connect the DVD system to TV
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
C
D
A
Television ( rear)
A Press STANDBY ON on the DVD system.
VIDEO IN
(CVBS)
B Press SOURCE on the DVD system until “DISC”
appears on the display panel.
VIDEO IN
(CVBS)
To off-air
antenna or
set-top box
CENTER
D
C
D
A
C
B
SUB-
WOOFER
REAR
LEFT
FRONT
LEFT
REAR
RIGHT
FRONT
RIGHT
DVD System (rear)
C Turn on the TV. Use the TV’s remote control to
Pr
Y
select the correct viewing channel for the DVD
system.
Pb
You should see the blue DVD background on the
TV.
A Place the centre speaker above or close to the TV.
Note To search for the correct viewing channel,
press the Channel Down button on the TV’s remote
control repeatedly (or AV, SELECT, ° button) until
you see the blue DVD background.
B Place the subwoofer on the floor, at least one metre
A Use the supplied composite video cable to connect
the CVBS socket on this DVD system to the
VIDEO IN socket on your TV.
away from the TV.
C Place the front speakers at equal disctances from the
TV.
B Plug in the power cable from the DVD system to an
DVD System (rear)
AC power outlet.
D Place the rear speakers at normal listening ear level.
Select the display language on the
screen
Note It is important to connect the DVD system
directly to your TV.
B
Connect the radio antennas
Keep the antennas away from the electronic devices to
prevent unwanted interference.
B
A Press SETUP.
The { General Setup Page } appears.
Connect the audio from TV to DVD
system (optional)
To hear the TV audio through this home theatre system,
use the red and white audio cables (not supplied) to
connect the TV IN (R/L) sockets on this DVD system to
the AUDIO output sockets on your TV.
E
A
General Setup Page
Disc Lock
Display Dim
Program
OSD Language
Screen Saver
DivX(R) VOD Code
English
Espanõl
Brazil Por
DVD System (rear)
Television ( rear)
AUDIO
OUT
B Press T to select { OSD Language } and press X.
AUDIO OUT
AUDIO
OUT
C Use TS keys to select a language option in the
menu and press OK to confirm.
AUDIO IN
D Press SETUP to exit.
C
B
b
Note The language set here is only for the menus that
are shown on the TV while operating this DVD system,
not for the DVD disc menu.
A Connect the FM antenna to the FM socket. Extend
the wire and fix its end to the wall.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this DVD system.
Refer to the user manual for more information.
DVD System (rear)
B Unfold the AM/MW loop antenna and fix the claw
into the slot.
Note Press TV on the remote control to get the
sound output from the speakers system when watching
the TV programme.
C Push the tabs and insert the wires into the AM/MW
sockets.
|